Welcome to East UK

Search results for 'drop configuration'

5 Item(s)

per page

Grid  List 

Set Descending Direction
  1. U-RETRO 01  Displayed For REFERENCE ONLY (Replaced by UNI-PRE 3 KNOB)

    U-RETRO 01 Displayed For REFERENCE ONLY (Replaced by UNI-PRE 3 KNOB)

    £0.00

    The U-RETRO 01, based on the J-RETRO 01, is a universal highly flexible on-board dual input preamp and EQ system. Its high quality circuit uses three stacked knobs and includes an active blend circuit plus a 3 band equaliser with bass, variable frequency mid, treble and bright function. The pot threads are 10mm long, designed to allow rear cavity mounting in the bass body.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  2. TONE LIFTER STACK KNOB IN PLACE OF MIDDLE PICKUP TONE

    TONE LIFTER

    £169.95

    Out of stock

    The Tone Lifter is a flexible self-contained drop-in module designed for Strats and Strat-style guitars, without any physical modifications to the instrument. Allowing numerous variations in sound, its bespoke stacked knob system is fitted in place of the lower tone knob. In bypass, the pure passive signal is output. Pulling the upper knob gives control of mid boost, or a combined bass/treble boost. The lower knob sets the frequency points for either mode. Power is provided by an internal rechargeable battery system, which is charged via the jack socket.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  3. J-Tone - Volume/Volume or Volume/Blend

    J-Tone - Volume/Volume or Volume/Blend

    £149.95

    We have often been asked...

    Is it possible to retain the original sound of a J style bass?, but with a modern Active EQ? in the same preamp, along with no changes to my bass?

    In response, we have created the J-TONE pre amp, replicating the authentic original passive wiring of the J style bass with a high spec Active EQ. It's designed as a direct drop-in replacement, including a place for the battery. It's easy to fit at home using basic tools, no soldering, no physical changes to the instrument*.

    The Passive wiring is available as either the classic Volume / Volume / Tone, or for those who prefer a master volume - Volume / Blend / Tone. Plug-in tone caps allow additional fine tuning of the passive tone control.

    The Active EQ is simplicity itself, incorporating highly responsive bass and treble controls, taken from our new high end UNI-PRE system. Internal edge wheels allow individual custom voicing for both the bass and treble control spectrums. Instrument qualities can be enhanced in conjunction with tone-shaping to match playing styles.

    Installation & Operation

    Click here to download Op-Manual PDF

    Learn More
  4. ACG EQ-01 4 Knob Filter Pre-amp

    ACG EQ-01 4 Knob Filter Pre-amp

    £200.00

    The EQ01 features two low-pass filters, one per pickup and a global high-pass filter, affording you the ability to EQ each pickup independently. The EQ01 is available in two configurations; the 4K and 5K. The 5K has the addition of a passive tone pot.

    Installation & Operation

    Click here to download Op-Manual PDF

    Learn More
  5. ACG EQ01 5 Knob Filter Pre-amp

    ACG EQ01 5 Knob Filter Pre-amp

    £210.00

    The EQ01 features two low-pass filters, one per pickup and a global high-pass filter, affording you the ability to EQ each pickup independently. The EQ01 is available in two configurations; the 4K and 5K. The 5K has the addition of a passive tone pot. The pot works the same way as a tone pot on any passive bass.

    Installation & Operation

    Click here to download Op-Manual PDF

    Learn More

5 Item(s)

per page

Grid  List 

Set Descending Direction