Welcome to East UK

U-RETRO 5 KNOB DELUXE FLAT RESPONSE Displayed For REFERENCE ONLY (Replaced by UNI-PRE 5 KNOB)

Be the first to review this product

Availability: In stock

£0.00

Quick Overview

The U-RETRO 5 KNOB DELUXE FLAT RESPONSE is fitted as standard in the OVERWATER SCOTT DEVINE SIGNATURE Bass. It features two stacked knobs and 3 single, allows a full Passive mode, with Volume, Blend plus Passive Tone. When set to Active, addional controls and functions include a 3 band equaliser with bass, variable frequency mid, treble and bright function. The Passive Tone operates in both Active and Passive.


Note:  ThE EQ voicing of this unit is different to the standard 5 Knob Deluxe.


Information Sheet


Click here for a detailed product information PDF

U-RETRO 5 KNOB DELUXE FLAT RESPONSE  Displayed For REFERENCE ONLY (Replaced by UNI-PRE 5 KNOB)

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

* Required Fields

£0.00

Details

 

The U-RETRO 5 KNOB DELUXE FLAT RESPONSE is fitted as standard in the OVERWATER SCOTT DEVINE SIGNATURE Bass. It features two stacked knobs and 3 single, allows a full Passive mode, with Volume, Blend plus Passive Tone. When set to Active, addional controls and functions include a 3 band equaliser with bass, variable frequency mid, treble and bright function. The Passive Tone operates in both Active and Passive.

 

Note:  ThE EQ voicing of this unit is different to the standard 5 Knob Deluxe.

The pot threads are 10mm long, designed to allow rear cavity mounting in the bass body.

The passive tone pot has a push/pull function which switches between active and passive paths:

PASSIVE (Pull Tone Knob)  Signals from the pickups pass through the passive blend, passive tone and then on through the passive volume control section, which feeds the jack.

ACTIVE (Push Tone Knob)  Signals from the pickups pass through the passive blend, passive tone, into the preamp input stage. Then through the equaliser and volume section within the active circuitry, and on through a low impedance output stage to the jack.

 The pots have 10.0mm threaded bushes designed for rear cavity mounting in the bass. Flat wire connections to the pots and toggle switches allow for flexible layout.
 
The preamp comes fully wired including battery clip and Switchcraft jack. For ease of installation, pickups are connected via screw terminals.  A ground wire will need to be connected to grounding points such as the bridge and any internal screening.
 
Out of the box, just connect the pickups using the screw terminals. snap on a battery, and you'll get sound. 

 

HARDWARE OPTIONS: Chrome, Black or Gold. (Can be mixed by special request)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.