Welcome to East UK

BASS

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  1. BLI - 01

    BLI - 01

    £25.00

    The BLI-01 is designed to indicate when the life your 9V or 18V battery system is getting towards the end of its life. At the point the waring LED begins to flash, around once per second, there is still some useful life left in the battery. This unit is ultra low power such that its power requirement is totally insignificant in terms of the overall battery life, even when the LED is flashing.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  2. MPM-01 FRONT VIEW

    MPM 02

    £60.00

    The MPM-02 consists of two identical configurable high impedance input amplifier stages. Designed for piezo as well as magnetic pickups, they can be configured to correctly mix piezo and magnetic pickup signals.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  3. MID SWEEP 01

    MID SWEEP 01

    £67.50

    The MID SWEEP 01 consists of a single stack knob stand-alone mid control which can be used on its own or cascaded in conjunction with other modules or systems. The upper knob allows boost and cut and the lower, the frequency point from very low to very high mid spectrum.

    Information Sheet

    Click here for the latest detailed product information PDF

     

    Previous product information PDF

    Learn More
  4. BTB 01

    BTB 01

    £89.50

    The BTB-01 consists of a single stack knob with Bass (boost only), Treble (boost & cut) and Pull for Bright. Its low noise high quality circuit is based on the middle knob of the J-RETRO 01. Its input stage uses a Class A FET for low noise and high quality sound. A gentle pre-shape contour, with slight low end and high end boost, gives an immediate lift to the sound.

    Information Sheet

    Click here for the latest detailed product information PDF

    Previous product information PDF

    Learn More
  5. 3 BAND FRONT VIEW (LH module is optional Mid)

    SPM-02 MODULES

    £79.95 £0.00

    The SPM-02 Modules are based around a knob per function concept, for those who prefer a visually simpler interface without stacked knobs. Its modular concept allows various combinations, with Volume, Blend, 2 or 3 Band EQ, plus Passive Tone. Pre-wired harnesses are available for most combination for easy installation. The 2 or 3 band EQ section can be optimised on a band by band basis, via frequency sweep preset controls inside the bass, set according to taste and the qualities of the instrument tonal palette.

    NOTE: Prices Do Not Include Knobs

    Learn More
  6. MMSR 4 KNOB 3 BAND TOP

    MMSR 4 KNOB 3 BAND

    £157.50

    The MMSR 4 Knob 3 Band has been designed with characteristics very similar to the original MM Stingray© 2 Band EQ, in order to retain the same interaction between the MM pickup and the electronics, crucial in creating the original pre EB sound colours. A Mid Sweep, is included along with original MM style Bass and Treble. When the Mid boost/cut is centred, its effect is neutral and the EQ is purely late 70s MM style.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  7. MMSR 3 KNOB 3 BAND TOP

    MMSR 3 KNOB 3 BAND

    £157.50

    The MMSR 3 Knob 3 Band has been designed with characteristics very similar to the original MM Stingray© 2 Band EQ, in order to retain the same interaction between the MM pickup and the electronics, crucial in creating the original pre EB sound colours. The Bass and Treble are stacked which allows inclusion of a Mid Sweep, along with original MM style bass and treble using a 3 knob plate. When the Mid boost/cut is centred, its effect is neutral and the EQ is purely late 70s MM style.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  8. MMSR 3 KNOB 2 BAND TOP

    MMSR 3 KNOB 2 BAND

    £107.50

    The MMSR 3 Knob 2 Band has been designed with characteristics very similar to the original MM Stingray© 2 Band EQ, in order to retain the same interaction between the MM pickup and the electronics, crucial in creating the original pre EB sound colours. Our circuit additionally has separate stages for the bass and treble, allowing us to further enhance and extend the bass control.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  9. U-RETRO 5 KNOB DELUXE  Displayed For REFERENCE ONLY (Replaced by UNI-PRE 5 KNOB)

    U-RETRO 5 KNOB DELUXE Displayed For REFERENCE ONLY (Replaced by UNI-PRE 5 KNOB)

    £0.00

    The U-RETRO 5 KNOB DELUXE with two stacked knobs and 3 single, allows a full Passive mode, with Volume, Blend plus Passive Tone. When set to Active, addional controls and functions include a 3 band equaliser with bass, variable frequency mid, treble and bright function, plus gentle pre-shape. The Passive Tone operates in both Active and Passive. The pot threads are 10mm long, designed to allow rear cavity mounting in the bass body.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More
  10. U-RETRO 4 KNOB DELUXE & FLAT RESPONSE VERSION Displayed For REFERENCE ONLY (Replaced by UNI-PRE 4 KNOB)

    U-RETRO 4 KNOB DELUXE & FLAT RESPONSE VERSION Displayed For REFERENCE ONLY (Replaced by UNI-PRE 4 KNOB)

    £0.00

    The U-RETRO 4 KNOB DELUXE with three stacked knobs and one single, allows a full Passive mode, with Volume/Blend plus Passive Tone. When set to Active, addional controls and functions include a 3 band equaliser with bass, variable frequency mid, treble and bright function. The Passive Tone operates in both Active and Passive. There are two versions, the original with a slight low and high end pre-shaper built in, and by consistent requests, a flat response unit.

    Information Sheet

    Click here for a detailed product information PDF

    Learn More

Items 1 to 10 of 22 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction